Enclosed Environment Heat Dissipation Solution

Enclosed electronic devices often struggle to dissipate heat effectively during high-power operation, leading to overheating, performance degradation, and even safety hazards. Our enclosed environment heat dissipation solution utilizes innovative thermal management materials and ventilation filtration technology to achieve a balance between efficient heat conduction and dissipation while maintaining high airtightness. This helps maintain optimal operating temperatures and is particularly suitable for communication, energy, and 5G equipment in high-density, demanding sealed environments, ensuring long-term, efficient, and stable system operation.

Communication Equipment: Achieves efficient heat dissipation within a fully enclosed chassis, preventing signal attenuation and equipment downtime caused by overheating.

Cleanroom Ductwork: Meets heat dissipation requirements in clean environments while maintaining high airtightness and dust-free filtration.

Lithium-ion Battery Cells: Effectively manages cell heat, preventing thermal runaway and improving the overall safety and energy density of the battery pack.

Outdoor High-Power Electronic Modules: Balances heat dissipation and protection in harsh outdoor environments, extending the service life of high-power equipment. Detailed Content

Solutions for Balancing Internal and External Pressure Differences and Condensation Control

In environments with drastic temperature changes, the pressure difference between the inside and outside of sealed electronic devices can increase rapidly, easily leading to casing deformation, seal failure, and even equipment malfunction and the risk of condensation due to moisture infiltration. Our solution for balancing internal and external pressure differences and controlling condensation employs advanced breathable membranes and valves with high air permeability and high waterproof ratings to achieve real-time and rapid pressure balance. It effectively blocks the intrusion of liquids, moisture, dust, and contaminants, significantly reducing the probability of condensation and providing reliable long-term sealing protection for electronic devices in automotive, outdoor, and harsh environments, ensuring stable equipment operation.

Automotive Electronic Systems: Effectively balances internal and external pressure differences caused by drastic temperature changes and driving vibrations, preventing seal failure and premature condensation, and improving the long-term reliability of core components such as ECUs and sensors.

Outdoor Electronic Equipment: Copes with pressure fluctuations and humidity intrusion in complex climatic environments, ensuring stable operation of equipment in rain, snow, and high humidity conditions.

Outdoor Communication Equipment: Maintains air pressure balance in harsh outdoor environments, prevents moisture intrusion, and ensures the continuity of communication signals.

Various Smart Terminals: Provides reliable breathable protection for outdoor smart devices, extending service life and improving environmental adaptability.

Condensation Elimination and Humidity Control Solutions

 Even with basic breathable protection, residual humidity can still occur in extreme temperature differences or high humidity environments, leading to condensation, corrosion, or performance degradation inside equipment. Our condensation elimination and humidity control solutions integrate passive and active humidity management technologies. Through specialized moisture-control materials and dehumidifiers, they actively absorb, expel, or control internal humidity, completely eliminating condensation. This provides a dry and stable internal environment for humidity-sensitive precision electronic equipment, extending equipment lifespan and improving reliability.

Automotive Lighting: Completely eliminates internal condensation caused by temperature differences, preventing fogging of optical components and ensuring lighting performance and operational safety.

 

Battery Packs: Effectively controls internal humidity in battery packs, preventing condensation from corroding cells and improving battery system safety and cycle life.

LiDAR: Precisely controls humidity-sensitive optical systems, eliminating the impact of condensation on laser emission and reception.

Semiconductor Equipment: Provides an ultra-low humidity environment for precision semiconductor processes, preventing product defects caused by minute condensation.

Solution to the Acoustic Conduction and Protection Dilemma

 Electronic devices, while pursuing high airtightness, often face problems such as obstructed acoustic conduction, displacement of acoustic components, or intrusion of external contaminants. Our acoustic conduction and protection dilemma solution employs advanced acoustically transparent membrane technology with high sound transmittance and dust/splash resistance, while simultaneously balancing pressure and optimizing acoustic performance to achieve a perfect balance between protection and conduction. It can also integrate a transparent heating film and cleaning system, providing clear and reliable acoustic protection for automotive and consumer electronics audio equipment.

Automotive Audio Systems: Provides high-transmittance protective membranes for car speakers and microphones, achieving waterproofing and dustproofing while maintaining high-fidelity sound quality, and preventing acoustic component displacement through internal and external pressure difference balancing.

Consumer Electronics Headphones and Speakers: Provides high acoustic transmission protection for headphones, portable speakers, and smart speakers in consumer electronics, achieving waterproofing and dustproofing while maintaining excellent sound quality. Pressure differential balancing prevents acoustic component displacement, improving product durability and sound performance.

Outdoor Audio Equipment: Achieves a balance between acoustic conduction and high protection levels for professional audio equipment in harsh outdoor environments.

Solutions for Battery Pack Safety and Explosion-Proofing

 Lithium-ion battery packs are prone to gas, heat, and humidity changes during charging and discharging. If pressure differentials, condensation, or heat cannot be effectively controlled, safety hazards and even explosion risks may arise. Our battery pack safety and explosion-proof solution integrates pressure differential balancing, humidity control, and efficient thermal management technologies to form a multi-dimensional safety protection system. This achieves rapid pressure relief, humidity stabilization, and heat dissipation, fundamentally improving the safety and reliability of the battery pack and providing comprehensive explosion-proof protection for new energy vehicles and energy storage systems.

Lithium-ion Battery Cells: Real-time balancing of internal pressure differentials and humidity within the cell prevents gas accumulation and thermal runaway, improving individual cell safety.

Energy Storage Systems: Providing comprehensive thermal, humidity, and pressure management for large energy storage battery cabinets to ensure long-term safe and stable operation.

Electric Vehicle Battery Modules: Achieving explosion-proof pressure relief in environments with vibration and drastic temperature changes, reducing the risk of safety accidents.

Solutions to Sealing Failure and Assembly Problems

In high-precision equipment, traditional sealing materials are prone to failure, leakage, or contamination during assembly, use, and extreme environments, severely impacting airtightness and equipment reliability. Our solutions to sealing failure and assembly problems utilize high-performance perfluoroelastomer (FFKM) rubber and professional signal shielding and protection materials, combined with automated assembly optimization technology, to provide ultra-high airtightness, chemical corrosion resistance, and cleanroom protection. This ensures zero-leakage and long-life stable sealing in cleanrooms, automated production lines, and harsh industrial environments.

Cleanrooms: Provides zero-contamination, ultra-high airtightness sealing solutions to meet the cleanroom requirements of semiconductor and precision manufacturing.

Semiconductor Manufacturing Equipment: Solves sealing failure problems during assembly, ensuring long-term stability of equipment in high-cleanliness environments.

High-airtight signal shielding precision instruments: Balances airtightness and electromagnetic shielding to meet the sealing requirements of high-end instruments in harsh industrial environments.

SST Waterproof and Breathable Solution – Experts in Safe and Breathable

Chemical Packaging During transportation and storage, chemical packaging containers are susceptible to risks such as gas expansion, pressure buildup, and deformation due to temperature changes. Simultaneously, leaks and external contamination must be prevented. SST's waterproof and breathable solution achieves pressure balance and release, combining waterproof, dustproof, and chemical corrosion resistance to ensure packaging safety and integrity.

 

Chemical Packaging Containers: Resolves the contradiction between "sealing-breathability-explosion prevention" in packaging, balancing internal and external pressure, preventing the penetration of harmful substances and the entry of external contaminants, and preventing packaging deformation, bursting, or leakage.

 

Applicable to: Chemical packaging, liquid fertilizer packaging, pesticide packaging.

 

Hazardous Liquid and Cleaning Agent Packaging: Effectively releases gas expansion pressure, resists strong acid and alkali corrosion, reduces transportation and storage risks, and improves overall packaging reliability and safety.

 

Applicable to: Cleaning agent packaging, breathable gaskets/valves on various chemical liquid containers.

Read More

Automotive Lights—headlights, taillights, fog lights, turn signals, grille lights, interior lights, license plate lights—combine function and style. Headlights, due to frequent use and visible issues, are a top source of consumer complaints.

In extreme conditions (summer heat soak, winter cold, high-humidity wading), common failures include internal fogging reducing brightness and unstable lighting from poor temperature adaptation—all tied to breathability. Proper breathable products greatly reduce fogging, maintain brightness, and extend reliability/lifespan.

SST Breathable Solutions SST products effectively solve these issues, enhancing light clarity and stability:

  • Moisture-wicking & Anti-Condensation — Rapidly expels internal moisture, prevents fogging and brightness loss, keeps fixtures dry and clean.
  • Pressure Balancing — Equalizes pressure differences from temperature changes, avoids shell deformation and seal failure.
  • Auxiliary Heat Dissipation — Enables micro-airflow, reduces overheating, protects electronics for consistent, bright performance.

Recommended SST Products: Adhesive-backed breathable membrane, press-type breathable valve, welded breathable membrane.

Automotive electronic control units (ECUs)—such as engine control unit, ABS control unit, on-board charger (OBC), battery management system (BMS), power distribution module, inverter, and electric power steering control unit—are core components of intelligent vehicles. They manage critical functions like power control, safe braking, and energy distribution. These precision electronics demand excellent sealing and environmental resistance, yet they often rank among the highest in failure rates, repair costs, and consumer complaints.

Under rapid temperature and humidity fluctuations, typical failures include internal condensation and corrosion, pressure imbalances causing housing deformation or seal failure, and degraded component performance—all closely tied to breathability. Proper breathable solutions can greatly enhance reliability and reduce failure rates.

SST Ventilation Solutions SST's professional ventilation products effectively address these challenges, improving the stability and durability of automotive ECUs:

  • Moisture Permeability & Anti-Condensation — Rapidly expels internal moisture to prevent condensation and corrosion, protecting precision circuit boards.
  • Pressure Balancing — Equalizes internal-external pressure differences from temperature changes, preventing housing deformation and seal failure.
  • Heat Dissipation Protection — Enables micro-air circulation to reduce localized overheating, safeguard chips, and ensure long-term system reliability.

Recommended SST Products: Adhesive-backed ventilation membrane, press-type ventilation valve, welded ventilation membrane.

In-vehicle electronics—such as navigation systems, displays, communication controllers, window/wiper/seat/sunroof motors, power modules, and actuators—drive connectivity, entertainment, comfort, and key functions. They demand excellent sealing, dust/moisture resistance, and temperature/humidity adaptability, yet remain highly prone to environmental failures and consumer complaints.

Extreme conditions (summer heat, winter heating, high humidity, A/C cycles) often cause condensation/corrosion, pressure-induced housing deformation or seal failure, and degraded motor/circuit/display/communication performance—all tied to breathability. Proper ventilation solutions greatly improve reliability and reduce failures.

SST Ventilation Solutions SST’s ventilation products effectively solve these issues, boosting stability and lifespan:

  • Moisture & Anti-Condensation — Rapidly expels internal moisture, prevents fogging and corrosion, protects motors, PCBs, displays, and modules.
  • Pressure Balancing — Equalizes pressure differences from temperature changes, avoids deformation, seal failure, and noise.
  • Heat Dissipation — Enables micro-airflow, reduces hot spots, safeguards coils, chips, and modules for consistent performance.

Recommended SST Products: Adhesive ventilation membrane, press-type vent valve, welded ventilation membrane.

Automotive Powertrain Systems—including transmission, differential, oil-cooled motors, reducers, hybrid units, range extenders, electric axles, motor controls, SCR/urea systems, drive modules, and EPS—are the core of power delivery in NEVs and traditional vehicles. They manage torque, speed, cooling, emissions, and steering. These parts require strong sealing, oil-mist resistance, high-temperature/pressure tolerance, and environmental durability, yet face high failure rates, costly repairs, and frequent complaints.

High-speed operation, rapid temperature shifts, and oil evaporation often cause oil mist contamination, pressure-induced shell deformation or seal failure, condensation/corrosion, and performance loss—all linked to permeability. Proper ventilation greatly improves reliability and cuts failures.

SST Ventilation Solutions SST products effectively address these issues, enhancing powertrain stability and lifespan:

  • Oil Mist Filtration — Blocks oil mist/particles, prevents contamination, expels gases for clean internals.
  • Pressure Balancing — Equalizes pressure from temperature/speed changes, avoids deformation, seal issues, and noise.
  • Anti-Condensation & Cooling — Removes moisture to prevent corrosion, aids heat dissipation, protects motors, controls, and precision parts.

Recommended SST Products: Adhesive ventilation membrane, press-type vent valve, welded ventilation membrane.

Hydrogen Fuel Cell System Components—cathode air filter, humidifier, ECU, coolant ion exchanger, particulate filter, cathode water separator—are critical for air purification/humidification, gas management, coolant purity, ion removal, and thermal safety in hydrogen vehicles. They demand superior sealing, corrosion resistance, extreme temp/humidity tolerance, explosion-proof design, and ultra-clean filtration. Failures are frequent, hard to repair, and impact safety, range, and trust.

In -40°C to +80°C swings, high water output, rapid pressure changes, and contaminant exposure: contamination reduces performance, pressure imbalance deforms shells/breaks seals, moisture/ions cause condensation/corrosion/short circuits, thermal runaway risks explosions—all linked to permeability, filtration, pressure. Proper venting/filtration solutions improve durability, safety, efficiency, cut failures.

SST Venting Solutions SST products effectively address these issues, enhancing fuel cell reliability and safety:

  • Moisture & Pressure Balance — Expels excess moisture, equalizes pressure, prevents condensation/corrosion/deformation, keeps stacks and controls dry/stable.
  • Explosion-Proof Overpressure Release — Rapidly vents abnormal pressure/thermal runaway, prevents explosions.
  • Filtration & Purification — Blocks particles/ions/contaminants, ensures clean, high-efficiency cathode, humidifier, cooling, separator operation.

Recommended SST Products: Adhesive venting membrane, press-type vent valve, welded venting membrane.

New Energy Vehicle Core Components—electronic water/oil pumps, battery packs & BMS, OBC, motor controllers, headlights, window/wiper motors, power modules, air suspension—are key to the "three-electric" and thermal management systems. They manage circulation, temperature control, cooling, and comfort. These parts require high-pressure sealing, extreme temperature/corrosion/vibration resistance, and explosion-proof safety. Failures in high-temp/humidity or intense cycling often lead to serious safety issues and complaints.

Common failures: condensation/corrosion/short circuits, pressure-induced deformation/seal failure, overheating/overpressure causing performance drop and thermal runaway—all linked to ventilation. Proper venting solutions improve safety, reliability, thermal runaway prevention, and reduce failures.

SST Ventilation Solutions SST products effectively solve these issues, enhancing NEV safety and stability:

  • Moisture & Anti-Condensation — Expels moisture fast, prevents corrosion/short circuits, keeps batteries, BMS, pumps, and circuits dry/safe.
  • Pressure Balancing — Equalizes pressure from temp/charge changes, avoids deformation, seal failure, explosion risks.
  • Explosion-Proof & Filtration — Releases overpressure, filters mist/particles, protects pumps, suspension, batteries for clean, efficient, safe operation.

Recommended SST Products: Adhesive ventilation membrane, press-type vent valve, welded ventilation membrane.

Automotive Sensors—millimeter-wave radar, lidar, gas sensors, position (angle/displacement/Hall), pressure (oil/air/tire), and other perception/control sensors—are vital for intelligent driving, emissions, safety, and chassis systems. They require high precision, waterproofing, dust/fog resistance, extreme temperature/humidity tolerance, and long-term reliability. Failures are easily noticed and often cause complaints or safety risks.

Harsh conditions (engine heat, winter cold, wading, rapid temp/humidity changes) lead to condensation/fogging/corrosion causing signal drift, pressure imbalance deforming housings or breaking seals, and humidity/temperature reducing sensitivity—all tied to breathability. Proper ventilation improves accuracy, adaptability, lifespan, and cuts failures.

SST Ventilation Solutions SST products effectively solve these issues, boosting sensor reliability and signal stability:

  • Moisture & Anti-Condensation — Quickly expels moisture, prevents fogging/corrosion, keeps optical/electrical paths clear.
  • Pressure Balancing — Equalizes pressure from temp/altitude/speed changes, avoids deformation, seal failure, drift.
  • Dust Protection — Blocks particles while allowing gas exchange, protects sensitive elements for long-term precision.

Recommended SST Products: Adhesive ventilation membrane, press-type vent valve, welded ventilation membrane.

Autonomous Driving Core Hardware (L2+ to L4)—millimeter-wave radar, LiDAR, forward/surround/in-cabin cameras, high-precision positioning (GNSS/IMU fusion), and domain controllers—faces extreme conditions: temperature swings, rain/snow, high humidity, and vibration. These demand superior waterproofing, dustproofing, fog resistance, corrosion protection, and long-term reliability. Failures here create serious safety risks and quality complaints.

In high-speed driving, extreme weather, and rapid temperature changes, common issues include optical/RF window fogging/condensation, pressure imbalance causing housing deformation or seal failure, and sensor drift/electronic faults from humidity/temperature/vibration—all tied to cavity permeability. Proper breathable solutions greatly enhance sensing clarity, adaptability, and system reliability.

SST Breathable Solutions SST products effectively address these challenges, improving autonomous system performance:

  • Moisture-wicking & Anti-Condensation — Rapidly expels internal moisture, prevents lens fogging and corrosion, ensures stable radar, LiDAR, and camera data.
  • Pressure Balancing — Equalizes pressure differences in real time, avoids deformation, seal failure, and zero-point drift.
  • Dustproof & Long-lasting Protection — Blocks dust, particles, and mist while allowing gas exchange, safeguards precision optical, RF, and electronic components over the full lifecycle.

Recommended SST Products: Adhesive-backed breathable membrane, press-type breathable valve, welded breathable membrane.

Automotive Motors—wiper, window, electronic water/oil pumps, start-stop, NEV cooling pumps, drive motors, and controls—are key to comfort, thermal management, power, and efficiency. They require strong sealing, waterproofing, dust/oil-mist resistance, high-temp/vibration tolerance, and reliability. Failures are frequent, noisy, costly, and lead to complaints.

In high-speed, start-stop, heat/cold, wading, and evaporation conditions, failures include condensation/corrosion causing shorts/insulation loss, pressure imbalance deforming housings/seals, and overheating/oil intrusion reducing performance/bearing noise—all related to permeability. Proper venting boosts durability, stability, and reduces failures.

SST Breathable Solutions SST products solve these issues, improving motor reliability and lifespan:

  • Moisture & Anti-Condensation — Expels moisture fast, prevents corrosion/insulation breakdown, keeps internals dry.
  • Pressure Balancing — Equalizes pressure from speed/temp changes, avoids deformation, seal failure, noise.
  • Oil Mist & Heat Dissipation — Filters mist/particles, blocks intrusion, enables cooling airflow for coils, bearings, controls.

Recommended SST Products: Adhesive breathable membrane, press-type vent valve, welded breathable membrane.

Intelligent Cockpit Air Filtration (VIAQ) Core—cabin filters, FreciousPlus, Cyclo-Multi-Sorber, HEPA H14, bio-functional, nanofiber, ENTARON CA 4 with smart sensors—filters PM2.5, odors, VOCs, bacteria, viruses, pollen, NO₂ for clean cabin air. Requires high efficiency, moisture/heat resistance, low resistance, low energy use. Failures cause strong passenger dissatisfaction and health complaints.

In summer heat, winter heating, high humidity, temp swings: efficiency drop with odor backflow, clogging raises fan noise/power, condensation breeds mold/bacteria, pressure imbalance causes bypass leaks—all tied to permeability, moisture, pressure. Proper breathable solutions improve durability, efficiency, anti-mold, VIAQ performance, reduce failures.

SST Breathable Solutions SST products solve these issues, enhancing filtration reliability and comfort:

  • Moisture & Anti-Condensation — Expels moisture fast, prevents condensation/mold/bacteria, keeps filter dry/efficient.
  • Pressure Balancing — Equalizes pressure, avoids deformation, bypass leaks, fan overload for steady low-resistance airflow.
  • Auxiliary Protection — Enables microcirculation, protects HEPA/carbon/nanofiber/bio-layers from moisture, boosts efficiency/lifespan.

Recommended SST Products: Adhesive breathable membrane, press-type vent valve, welded breathable membrane.